Engineered Stone Benchtops

CARE & MAINTENANCE –UNIQUARTZ (ENGINEERED)STONE

Everyday Cleaning

Uniquartz requires very little maintenance to keep the surface looking like new. For everyday routine cleaning of your Uniquartz countertop we recommend wiping the surface with clean warm soapy water from a mild detergent and a damp cloth, followed by drying the surface with a clean towel. We also recommend use of a quality stone-safe spray and wipe cleaner such as Quartz Clean Spray Cleaner® regularly, for more intense cleaning, use Quartz Clean Cream Cleanser® (these are both available from Universal Granite Limited). Please understand that the concrete finish will require more daily maintenance than our polished finish as metal marks, fingerprints and other signs of daily living will show on the concrete finish. It is also important to understand that like all materials with dark colours show marks and smears more readily than light colours.

Tough? Yes. Indestructible? No.

As with any surface, Uniquartz can be permanently damaged by exposure to strong chemicals and solvents that undermine its physical properties. Do not use any products that contain trichlorethane or methylene chloride, such as paint removers or stripper. Avoid any highly aggressive cleaning agents like oven cleaner that have high alkaline/pH levels. Should the surface be accidentally exposed to any of these damaging products, rinse immediately with water to neutralize the effect.

Food Preparation

We always recommend cutting on an appropriate cutting board and never directly on the Uniquartz surface.

Polishing

As polished Uniquartz is virtually non-porous it will keep its lustrous gloss and ultra-smooth surface without polishing and it never needs sealing. Products with a concrete finish do require sealing to maintain optimum appearance. Tenax® Hydrex Sealer applied at the time of installation is recommended.

Heat Resistance

Uniquartz will tolerate brief exposures to moderately high temperatures, however,prolonged direct contact with, or radiated heat from very hot pots can cause thermal shock, discolouration or damage. Therefore we do not recommend placing hot pots, pans, electric frying pans, oven trays, etc. directly from the hotplate or out of the oven onto the surface of Uniquartz. We always recommend the use of a chopping board or heat trivet to place hot items on.

Quartz Clean Spray Cleaner® & Quartz Clean Cream Cleaner®

Quartz Clean Spray Cleaner is for everyday cleaning of Uniquartz benchtops and wet spills, simply spray the surface and wipe clean with a damp cloth.

Quartz Clean Cream Cleaner is for more stubborn stains and dried spills that require a more thorough clean, apply a small amount to a wet cloth or sponge, wet the surface and wipe in a circular motion until the mark has gone then wipe off residue with a clean damp cloth.

For further advice about cleaning and maintaining your Uniquartz® benchtop, please call 09 274 8846 or enquire via our website https://uniquartz.co.nz/

 

Thank you for purchasing from our UNIQUARTZ Quartz (Engineered) stone range. We hope you enjoy your benchtop for many years to come.

Terms and Conditions

This warranty applies to product that was installed after April 29, 2011.

  • This warranty applies only to Uni Quartz surfacing materials and does not apply to any other products, including other quartz surfacing products manufactured or supplied by any other party.
  • This warranty applies only to Uni Quartz surfacing materials that have been permanently installed in the interior of single-family residences and have not been moved from their original installation. If after or during installation you decide that you do not like the color or finish you selected, that decision is not covered under this warranty.
  • This warranty does not cover any residence where the owner is not the occupant. This warranty does not cover materials and/or services that have not been paid in full.
  • This warranty applies only to materials that have been maintained according to the Uni Quartz Care & Maintenance guidelines. Care & Maintenance guidelines are available at www.Uniquartz.co.nz
  • To request service under this warranty you must contact the company who sold you Uni Quartz or contact Uni Quartz Ltd. directly at (0064) 9 278-6634 within seven (7) days of the failure results warranty expires.
  • This warranty is not transferable under the following conditions.
    In the event that Uni Quartz surfacing materials fail due to a manufacturing defect, Uni Quartz Products, will, at its sole discretion, repair or replace such materials. Quartz Products, Inc. will seek to obtain the best possible result, whether we decide to repair or replace your installation. However, exact color match is never guaranteed. All decisions regarding this warranty are at the sole discretion of Uni Quartz Ltd. No representative, dealer, salesperson, distributor, fabricator or any other person is authorized to make any warranty or promises on behalf of Uni Quartz Products, with respect to Uni Quartz surfacing products.

Exclusions

  • This warranty does not cover use for any commercial purposes. Commercial use includes but is not limited to, use in a store, rental properties, office or any other place of business.
  • This warranty does not cover products installed in any outdoor application.
  • This warranty does not cover products used as flooring material.
  • This warranty does not cover improper use or abuse. Improper use or abuse includes, but is not limited to, damage from mishandling of the product, damage from excessive heat or uneven exposure to weather conditions, physical or chemical abuse and damage from improper care and maintenance.
  • This warranty does not cover chips or other excessive impact damage in the product.
  • This warranty does not cover scratches. Uni Quartz is a very hard material and highly scratch resistance but not scratch proof. Proper care must be exercised including the use of a cutting board as part of your care and maintenance.
  • This warranty does not cover routine maintenance. Routine maintenance includes but is not limited to, minor conditions such as removing stains and water spots by following the techniques specified in the Uni Quartz online Care & Maintenance Guidelines at www.UniQuartz.co.nz
  • This warranty does not cover failures due to fabricators/installers not following the prescribed fabrication and installation procedures as outlined by Uni Quartz Ltd. Improper fabrication and/or installation is the sole responsibility of the fabricator and/or installer.
  • This warranty does not cover any defects that were visible at the time of fabrication and were not avoided during fabrication. Fabricators are required to perform a visual inspection of all materials prior to fabrication and again prior to installation.
  • This warranty does not cover seam appearance or seam performance, adhesives, caulk or other accessory items. Once the product is installed, the two main reasons for seam separation or cracking are the shifting or movement of the substrate, cabinets or foundation, and thermal shock. Thermal shock can occur when a hot pan, dish or other receptacle or object is left on the countertop for more than a brief period. Trivets or hot pads should always be used. These issues are not considered material defects and are subject to proper care and maintenance by the owner.
  • This warranty does not cover any chemical damage.
  • This warranty does not cover any creative use of the material including bending or curving.
  • This warranty does not cover material that has been milled or reduced in thickness.
  • This warranty does not cover the installation of sinks.
  • This warranty does not cover securing mechanical fasteners directly into the material.
  • This warranty does not cover any failures due to inadequate support for the installation. This includes overhangs in excess of the recommendations provided by Uni Quartz which are inadequately supported.
  • This warranty does not cover any chips or cracks that are a result of “dry” cutting or polishing.
  • This warranty does not cover chips or cracks that are a result of not following the minimum requirements for edge details.
  • This warranty does not cover mitered edges where the joint is not cut correctly.
  • This warranty does not cover the altering of any factory applied finish. Only colors listed as available in our brochure, sample book or on our website as “honed” are eligible under this warranty. Any issues arising from the practice of “in-shop” honing are the sole responsibility of the fabricator.
  • This warranty does not cover temporary marks that are common to honed finishes such as metal marks, fingerprints or other signs of daily living. A signed “Special Care Considerations for Uni Quartz Honed Finishes” form is required to be submitted to Uni Quartz or its assigns to receive coverage under this warranty. This form must be signed by the end user/owner of the finished installation.
  • This warranty does not cover additional modifications such as plumbing, electrical, tile, cabinets, flooring etc that may be necessary to repair or replace the Uni Quartz product covered under this warranty.
  • This warranty does not cover natural variations in the color, size, shape and distribution of the pattern of the natural quartz or the natural variations in background tone. These characteristics are inherent and unique characteristics of the product. Color samples provided to consumers, dealers and fabricators are only representative and not an exact replication of what will be installed in your home.
  • This warranty does not cover what is referred to as spots or blemishes smaller that a 10mm radius. A certain level of spots or blemishes are inherent in the manufacturing process and do not affect the structural integrity of the material.
  • Uni Quartz materials contain important product information on safety.

Uni Quartz Ltd. is not responsible for damage or injury caused in whole or in part by acts of Good, job site conditions, and architectural/engineering design, and structural movement, acts of vandalism or accidents.

Uni Quartz Ltd. shall not be responsible in either contract or tort for any loss of direct, indirect, consequential, incidental, special, exemplary, or punitive damages arising out of the use or the inability to use the products covered by this warranty.

Uni Quartz Ltd. shall not be responsible in either contract or tort for any loss of direct, indirect, consequential, incidental, special, exemplary, or punitive damages arising out of the use or the inability to use the products covered by this warranty.

THE FOREGOING IS THE COMPLETE WARRANTY FOR UNI QUARTZ AND SUPERSEDES ALL OTHER WARRANTIES AND REPRESENTATIONS, WHETHER ORAL OR WRITTEN. EXCEPT AS EXPRESSLY SET FORTH ABOVE, NO OTHER WARRANTIES ARE MADE WITH RESPECT TO UNI QUARTZ AND UNI QUARTZ LTD. EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED HEREIN, INCLUDING, TO THE EXTENT PERMITTED BY APPLICABLE LAW, ANY WARRANTY THAT MAY EXIST UNDER NATIONAL, STATE, PROVINCIAL OR LOCAL LAW INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SOME STATES OR OTHER JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

This warranty gives you specific legal rights, and you may also have other rights which vary from fabricator to fabricator.